Panasonic Domes WV-CS850/854E/CS600/CS650

The commands of the Panasonic dome system are not compatible with the commands of the KDec system.

Complete conversion is necessary. This procedure is described in the following table.

Pin assignments of connecting cable:

Number of preset positions: 40

Number of possible camera numbers: 1...96 (32 users are physically possible on the RS485 bus)

Meaning of variables:
• kkk = Enter number of dome camera, with leading zeroes if necessary
• pp = Enter preset position of selected dome camera, with leading zeroes if necessary
• vvv = Additional variable speed parameters

Panasonic functions	KDec command	MBeg	MBeg/VS
Pan right	SNkkkS-	With keys (stop = release)	With joystick
Pan left	SNkkkS+
Tilt down	SNkkkN-	With keys
Tilt up	SNkkkN+
Pan and tilt at fast speed	SNkkk++	Press and hold key	Automatic with joystick
Pan and tilt at normal speed	SNkkk--	Release key	Automatic with joystick
Focus near	SNkkkF-	With key	Focus rocker switch
Focus far	SNkkkF+	With key
Focus stop	SNkkkF0	Release key /	Release focus
Zoom wide	SNkkkZ-	With key	Zoom rocker switch
Zoom tele	SNkkkZ+	With key
Zoom stop	SNkkkZ0	Release key /	Release zoom
Store preset	PPkkk.pp	Program preset (1 – 40)
Go to preset	SNkkk.pp	Go to preset (1 – 40)
Automatic pan between two positions	SNkkkSA	Automatic pan